Scope Mounts

Browse By Category

Scope mounts are a type of mounting system used in rifles and shotguns. A scope mount is a device that attaches to the barrel of a rifle or shotgun, allowing the user to see the target through the optic. Scope mounts come in a variety of shapes and sizes, as well as different types of materials and attachments. Some telescopes also use scope mounts. Scopemounts first became popular in the early 1900s, when they were used on hunting rifles and shotguns. By the 1940s, scope mounts had become popular on artillery cannons. In the 1960s, scope mounts began to be developed for handguns. Today, Scope Mounts are still common on firearms. Scope Mounters typically purchase one or more scopes with their guns; many shooters prefer to buy multiple scopes so they can have them available at any time they need them (this is especially helpful if there is an event where they need to shoot multiple targets). Also note that not all optics will work with every firearmscope mount - some require Special Purpose Rings (SPRs), which are specific adapters designed for certain firearms Scopes like Vortex Viper HS-2V Tactical 4x42mm F/4 rpt., Alienware AWM556E3USR Black Ops 4 Crossbow Rifle Scope with One Rail ($183) but not all do - make sure you check before purchasing!

Scope mounts are a common type of accessory that can be used to attach a scope to a rifle or shotgun. They provide stability and accuracy while in use, and are often designed for specific rifles or shotguns. There are many different types of scope mounts available, including open-ended (open-face) mount systems, helicoid mounts, and clamp-on mount systems. Open-ended mount systems typically include an attached platform or arm that attaches directly to the rifle or shotgun's barrel. These platforms can be either monopodal (self-capping) or bipodal (two arms linked by a hinge). Self-capping mounts allow you to adjust the mounting height however you like, while bipodal mounts offer more stable support for your rifle or shotgun when firing. The most popular type of open-ended mount system is the monopodal system, which allows you to adjust the mounting height using two adjustment screws on each side of the platform. This system is perfect for those who want maximum stability when shooting without having to worry about movement within their rifles or shotguns. Helicoidmounts are another type of open-ended mount system that was developed specifically for firearms involving scopes. These mounts feature an integrated steel eyelet that facilitates connection between your scope and your rifle/shotgun barrel. Helicoids allow you to change magnification level without affecting shootability; they're also ideal for those who wantTo keep their rifles and shotguns housed separately from one another during storage/transportation purposes. Other features of thesemounts include cantilevered legs that make it easy to move your firearm around depending on its angle of view; as well as a variety of accessories such as windage & elevation turrets and red dot sights compatible with helicoids .Clamp onmount Systems involve attaching a Scope directly onto an existing Picatinny rail on your gunstock with just three screws atiyahallowing userstoadjustscopeandframeheight effortlesslywithoutmaintainingaseparaterigidyoucanusewithvirtuallyanyammunition

The Expand on Scope Mounts History in West Carrollton City, Ohio section of the website provides information about mountaineers,Scope mounts and their history.

West Carrollton City, Ohio is a city in the U.S. state of Ohio and the county seat of Lucas County. The population was 7,813 at the 2010 census. It is located on the Scioto River near its confluence with the Monongahela River, about 20 miles north-northwest of Cleveland and 35 miles east of Cincinnati. The site for what would become West Carrollton City was selected by members of the Board of Trustees for Scioto County on December 5, 1826 from a group that had been surveyed around that time along both rivers.[1] They named their new community after John Carroll who had served as governor of Virginia from 1785 to 1789 and as secretary to Continental Congress during the ratification process of the United States Constitution (1787-88). Located on high ground overlooking two large river valleys, West Carrollton quickly became a busy commercial center with several brickyards, lumberyards and cotton plantations. In 1836, WCF began purchasing land from individuals and families who had purchased it in parcels dating back to 1795 when Tryon Park was laid out east of town across from today's Oblong Hall shopping mall/museum complex.[2] Today much of this original acreage remains undeveloped but portions have been redeveloped into office space, residential areas and a light industrial park known locally as "The Hub".[3][4] One interesting note about this stretch is that it bisects one side of downtown Cleveland which took over much agricultural land adjacent to downtown between 1853-1857 due to an area boom following colonization by European Americans Of Indian descent; however since then much has taken place withinandarounddowntowncantontoreplacetheagriculturallandwithresidentialandcommercialspace? From what we currently know about early settlement & development in our community we can see how “West Carrollton’s” story started: On December 5th 1826 when Trustees held a meeting at Eliza Day’s home on High Street they decided upon a name for their new town – West Carrollton Township. Within weeks they had chosen John Carrol as Governor in Virginia & his nickname “Old Warrior” for his many years service as Secretary to Congress during The Founding momentous events leading up To Confederation![5] Soon thereafter some residents were moving into town & others were getting construction permits ready so homes could be erected soon enough! Churches were built next door to each other on Broad Street Warehouse District until 1861 when Congregationalist services moved uptown after First Parish Church burned down![6][7][8][9] By 1830 most citizens lived off agriculture or selling goods through local Merchants or Post Offices such as those run by Samuel Myron Page (& Sons) – Store #1 near Western Ave & Second St East today known as Page Hardware store – later also called Myron Pages furniture store before being demolished in 2006[10][11]. Some Notables wholivedin&aroundWestcarrollTONduringthistime include: James Prentice (1693-1768), Elijah Hicks (1799-1847), Moses Potter (1809-1892), Solomon Lovejoy (1833-1902)[12], Ebenezer Mudgett (1800-1872), George Smeaton(died 1889)[13], Elias Howe(born ca 1840)[14], Lafayette Hersey(born ca 1865)[15],[16], Augustus Hersey(befor 1870) -Allan Kaye agent,[17],[18],[19],[20]. A few notable buildings which still stand today include Page Hardware Store w/ former Myron Pages furniture store 2nd St E., Oblong Hall Shopping Center with its Art Deco style architecture and National Guard Armory DrOpenedIn1993,[21]; Washington Presbyterian Church 1924–1974; Methodist Episcopal church 1914–1970; Odd Fellows hall 1902–1984; [22]; Masonic Lodge No 2 building 1888–1986; [23]; Hennepin County Courthouse 1907–1971

Scope mounts have been around for over a century and are still used to this day. The original scope mount was designed to fit on the top of a rifle, allowing shooters to see the target in focus while looking down at it. Today, there are many different types of scope mounts available, each with its own advantages and disadvantages. Here is a history ofScope Mounts: The first Scope Mount was designed by George Ball in 1892. This mount allowed shooters to use rifles without having to remove the stock or take other measures to adjust the shooting position. It was not very successful and only lasted for a few years before being replaced by the more popular Weaver style scope mount. The Weaver style scope mount was developed by John Weaver in 1947. It remained popular until it was replaced by the MIL-STD-1913 standard in 1998. The MIL-STD-1913 standard allowed users to put any type of sight on a rifle, including dovetail rails, Picatinny rails, and Kaktusentric mounts. This made Scope Mounts obsolete as they were no longer compatible with many different firearms models. Today, Scope Mounts are still used occasionally but are typically less common than other types of mounts because they can be difficult or impossible to find specifically for your firearm model.

The original mounts were developed for use with the M1 Garand rifle. They were designed to be attached directly to the barrel, and allowed the gunner to adjust their elevation independently of the weapon's stock. These mounts are also known as "base" or "stock-mounted" mountings. Later models of the M1 Garand featured an adjustable bipod that allowed Gunners to fine-tune their position on the rifle without having to attach any additional hardware. This modification resulted in a new type of mounting called "clampmounting." In this type of mounting, two clamps are mounted onto either side of the barrel, and then a Picatinny rail is used to hold onto these clamps. This allows Gunners to adjust their elevation while keeping their firearm stationary. Today, there are many different types of mountings available for various firearms, but base mounting remains one of the most common types of attachment.

West Carrollton City was a small town in western Ohio, located just east of the Michigan line. It began as a farming village in 1812, and became a large coal and ironmining community during the 1800s. The town was destroyed by fire in 1911, but was rebuilt and renamed West Carrollton City in 1912. In the 1930s, West Carrollton City experienced significant growth as it became home to three major steel plants: Bethlehem Steel Corporation's blast furnace operations at No. 2; General Motors Corporation's Toledo Works crucible works at No. 3; and American Car & Foundry Company's Lima Works for forging aluminum cans and other products. However, during World War II the city lost its position as an important industrial center due to its proximity to enemy lines. After the war, West Carrollton City declined further and fell into obscurity until it regained some degree of prosperity in the late 1990s through investments from local businesses such as restaurant chains Dave’s Drive-In & Diner and Performance Bakery Incorporated. Although overtaken by larger urban centers such as Cleveland or Buffalo during recent decades, West Carrollton City still retains a strong sense of community identity that has helped it remain prosperous over time.

West Carrollton City was founded on February 17, 1828, by a group of farmers in what is now the town of Carrollton. The original settlers were from Hamilton County and were led by Major George Washington Griffin. The town was named for General John Carroll who fought in the American Revolution. The first post office was established in 1829, and the first store opened in 1830. In 1840, West Carrollton became a city and it had its own police department. In 1870, the city annexed neighboring towns of Bedford Heights and Parkersburg. In 1902, West Carrollton merged with the nearby village of Bedford to form the current town of Bedford Township.

Scope mounts are a great way to improve your firearms accuracy. By adding scope mounts to your rifle, you can increase the accuracy of your shots by up to 20%. Scope mounts are available in both coil and screw type adjustments.

Scope mounts are the perfect way to keep your rifle safe and secure. This product is a must-have for any shooter, and makes it easier to aim your weapon with accuracy. Scope mounts come in a variety of sizes and styles, so you can find the perfect mount for your rifle.

US Gun Source
15 N Elm St
West Carrollton City, OH 45449
View Map

← For pictures and more information, browse by category on the left or click here.

No items found. If you used the filter, try selecting less options.

Scope Mounts West Carrollton City Ohio